No products in the cart.
SFP-GE-Z
Model:
SFP-GE-Z 1000BASE-ZX Gigabit Ethernet SFP (DOM)
In Stock
Categories: Cisco, Cisco Optics SFP Modules
Quick Specs
Figure 1 shows the appearance of SFP-GE-Z.
Table 1 shows the Quick Specs.
Part Number: |
SFP-GE-Z |
Form Factor: |
SFP |
TX Wavelength: |
1550nm |
Reach: |
80km |
Cable Type: |
singlemode fiber |
Rate Category: |
1000Base |
Interface Type: |
ZX |
DDM: |
Yes |
Connector Type: |
Dual-LC |
Description
SFP-GE-Z Overview
SFP-GE-Z is a Cisco compatible 1000Base SFP Optical Transceiver and is factory preprogrammed with all the necessary configuration data for seamless network integration.
SFP-GE-Z Specification
1000BASE-ZX Gigabit Ethernet SFP (DOM)
Be the first to review “SFP-GE-Z” Cancel reply
Related products
Quick Specs
Figure 1 shows the appearance of NIM-ES2-4=. Table 1 shows the Quick Specs.Product Code | NIM-ES2-4= |
Form factor | Single-wide NIM form factor |
Ports | 4-port Gigabit Ethernet |
Dimensions (H x W x D) | 0.8 x 3.1 x 4.8 in. (2.1 x 7.9 x 12.2 cm) |
Weight | 79g (0.17 lb) |
Platform Support
Table 2 shows recommended platforms that support the 4-port Cisco Gigabit Ethernet LAN Switch NIMs.Platform | Platform Maximum Support |
Cisco 4221 | 2 |
Cisco 4321 | 2 |
Cisco 4331 | 2 |
Cisco 4351 | 3 |
Cisco 4431 | 3 |
Cisco 4451 | 3 |
Compare to Similar Items
Table 3 shows the similar items.Model | NIM-ES2-4= | NIM-ES2-8 |
Form factor | Single-wide NIM form factor | Single-wide NIM form factor |
Ports | 4-port Gigabit Ethernet | 8-port Gigabit Ethernet |
Dimensions (H x W x D) | 0.8 x 3.1 x 4.8 in. (2.1 x 7.9 x 12.2 cm) | 0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm) |
Weight | 79g (0.17 lb) | 108g (0.24 lb) |
Quick Spec
The figure shows the appearance of NIM-2CE1T1-PRI. Table 1 shows the quick spec.Product Number | NIM-2CE1T1-PRI |
Product Description | 2 port Multi-flex Trunk Voice/Channelized Data T1/E1 Module |
Number of Ports | 2 |
Dimensions (H x W x D) | 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm) |
Weight | 0.42 lb (191g) |
Supported Devices
Table 2 shows the supported devices for the NIM-2CE1T1-PRI.Product number | Model | Description |
Cisco ISR4321/K9 | Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) | 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC |
Cisco ISR4331/K9 | Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) | 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC |
Cisco ISR4351/K9 | Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) | 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC |
Cisco ISR4431/K9 | Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) | 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs |
Compare to Similar Items
Table 3 shows the comparison between NIM-2CE1T1-PRI and NIM-8MFT-T1/E1.Product Number | NIM-2CE1T1-PRI | NIM-8MFT-T1/E1 |
Product Description | 2 port Multi-flex Trunk Voice/Channelized Data T1/E1 Module | 8 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module |
Number of Ports | 2 | 8 |
Dimensions (H x W x D) | 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm) | 1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm) |
Weight | 0.42 lb (191g) | 0.52 lb (236g) |
Quick Specs
Table 1 shows the Quick Specs.Product Code | SPA-1CHSTM1/OC3V2= |
Product compatibility |
|
Minimum software version |
|
Protocols | Serial encapsulations: *High-Level Data Link Control (HDLC) *Point-to-Point Protocol (PPP), RFC 1662 *Frame Relay, RFC 1490 Multilink support (bundle limit dependent on number of links per bundle; maximum of 12 links per bundle): *Multilink PPP (MLPPP), RFC 1990 *Link fragmentation and interleaving (LFI) over Frame Relay (FRF.12) and MLPPP Networking protocols: *IPv4/IPv6 |
Cards, ports, and slots | 1 port |
Reliability and availability | OIR Field-replaceable SFP optics modules Support for both 1 + 1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols Single SPA software reset |
MIBs | RFC 2558 MIB (SONET/SDH) RFC 2495 MIB (T1/E1) RFC 2496 MIB (T3/E3) |
Network management | Simple Network Management Protocol (SNMP) |
Physical specifications | Weight: 0.75 lb (0.34 kg) Height: 0.8 in. (2.03 cm) Width: 6.75 in. (17.15 cm) Depth: 7.28 in. (18.49 cm) |
Quick Spec
The figure shows the appearance of NIM-4E/M. Table 1 shows the quick spec.Product Number | NIM-4E/M |
Product Description | 4-Port E/M Network Interface Module |
Number of Ports | 4 |
Cisco IOS Release | XE3.14.3, XE3.15.1, XE3.16 and above |
Weight | 0.44 lb (200 g) |
Supported Devices
Table 2 shows the supported devices for the NIM-4E/M.Product number | Model | Description |
Cisco ISR4321/K9 | Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) | 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC |
Cisco ISR4331/K9 | Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) | 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC |
Cisco ISR4351/K9 | Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) | 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC |
Cisco ISR4431/K9 | Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) | 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs |
Compare to Similar Items
Table 3 shows the comparison between NIM-4E/M and NIM-2FXS.Product Number | NIM-4E/M | NIM-2FXS |
Product Description | 4-Port E/M Network Interface Module | 2-Port Network Interface Module - FXS, FXS-E and DID |
Number of Ports | 4 | 2 |
Cisco IOS Release | XE3.14.3, XE3.15.1, XE3.16 and above | XE3.13.4, XE3.14.3, XE3.15.1, XE3.16 and above |
Weight | 0.44 lb (200 g) | 0.42 lb (191 g) |
Quick Specs
Figure 1 shows the appearance of PVDM4-128. Table 1 shows the Quick Specs.Product Code | PVDM4-128 |
Slot | On-board motherboard or T1/E1 module slot |
Description | 128-channel high-density voice DSP module |
Low Complexity | 128 |
Medium Complexity | 96 |
High Complexity | 64 |
Compare to Similar Items
Table 2 shows the comparison of PVDM4-64, PVDM4-32 and PVDM4-128.
Product Code | PVDM4-64 | PVDM4-32 | PVDM4-128 |
Slot | On-board motherboard or T1/E1 module slot | On-board motherboard or T1/E1 module slot | On-board motherboard or T1/E1 module slot |
Description | 64-channel high-density voice DSP module | 32-channel high-density voice DSP module | 128-channel high-density voice DSP module |
Low Complexity | 64 | 32 | 128 |
Medium Complexity | 48 | 24 | 96 |
High Complexity | 32 | 16 | 64 |
Quick Spec
Figure 1 shows the appearance of C9300-NM-8X.
Part Number | C9300-NM-8X |
Product Description | Catalyst 9300 8 x 10GE Network Module |
Supported Devices | Cisco Catalyst 9300 Series Switch |
Compare to Similar Items
Table 2 shows the comparison between C9300-NM-8X and C9300-NM-2Q.Product Code | C9300-NM-8X | C9300-NM-2Q |
Product Description | Catalyst 9300 8 x 10GE Network Module | Catalyst 9300 2 x 40GE Network Module |
Supported Devices | Cisco Catalyst 9300 Series Switch | Cisco Catalyst 9300 Series Switch |
Reviews
There are no reviews yet.