SFP-GE-Z

Model: SFP-GE-Z 1000BASE-ZX Gigabit Ethernet SFP (DOM)
In Stock
Login To See Price
Categories: ,

Quick Specs

Figure 1 shows the appearance of SFP-GE-Z.

Table 1 shows the Quick Specs.

Part Number:

SFP-GE-Z

Form Factor:

SFP

TX Wavelength:

1550nm

Reach:

80km

Cable Type:

singlemode fiber

Rate Category:

1000Base

Interface Type:

ZX

DDM:

Yes

Connector Type:

Dual-LC

Description

SFP-GE-Z Overview

SFP-GE-Z is a Cisco compatible 1000Base SFP Optical Transceiver and is factory preprogrammed with all the necessary configuration data for seamless network integration.

SFP-GE-Z Specification

1000BASE-ZX Gigabit Ethernet SFP (DOM)

Reviews

There are no reviews yet.

Be the first to review “SFP-GE-Z”

Your email address will not be published. Required fields are marked *

Related products

SPA-1CHSTM1/OC3V2=
Add to wishlist Compare

SPA-1CHSTM1/OC3V2=

Login To See Price Read more

Quick Specs

Table 1 shows the Quick Specs.
Product Code SPA-1CHSTM1/OC3V2=
Product compatibility
  • ● Cisco 7600 Series Routers
  • ● Cisco ASR 1000 Series Routers
  • ● Cisco ASR 9000 Series Routers
Minimum software version
  • ● Cisco 7600 Series Routers: Cisco IOSSoftware Release 15.4(2)S and Cisco IOS XE Software Release 3.12.0.0S
  • ● Cisco ASR 1000 Series Routers with Cisco IOS XE Software Releases 3.12.0,3.11.2,and 3.10.3
  • ● Cisco ASR 9000 Series Routers with Cisco IOS XR Software Release 5.2.0
Protocols Serial encapsulations: *High-Level Data Link Control (HDLC) *Point-to-Point Protocol (PPP), RFC 1662 *Frame Relay, RFC 1490 Multilink support (bundle limit dependent on number of links per bundle; maximum of 12 links per bundle): *Multilink PPP (MLPPP), RFC 1990 *Link fragmentation and interleaving (LFI) over Frame Relay (FRF.12) and MLPPP Networking protocols: *IPv4/IPv6
Cards, ports, and slots 1 port
Reliability and availability OIR Field-replaceable SFP optics modules Support for both 1 + 1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols Single SPA software reset
MIBs RFC 2558 MIB (SONET/SDH) RFC 2495 MIB (T1/E1) RFC 2496 MIB (T3/E3)
Network management Simple Network Management Protocol (SNMP)
Physical specifications Weight: 0.75 lb (0.34 kg) Height: 0.8 in. (2.03 cm) Width: 6.75 in. (17.15 cm) Depth: 7.28 in. (18.49 cm)
C9300L-48P-4X-E
Add to wishlist Compare

C9300L-48P-4X-E

Login To See Price Read more
Catalyst 9300 48-port fixed uplinks PoE+, 4X10G uplinks, Network Essentials
NIM-2FXS
Add to wishlist Compare

NIM-2FXS

Login To See Price Read more

Quick Spec

The figure shows the appearance of NIM-2FXS. Table 1 shows the quick spec.
Product Number NIM-2FXS
Product Description 2-Port Network Interface Module - FXS, FXS-E and DID
Number of Ports 2
Cisco IOS Release XE3.13.4, XE3.14.3, XE3.15.1, XE3.16 and above
Weight 0.42 lb (191 g)

Supported Devices

Table 2 shows the supported devices for the NIM-2FXS.
Product number Model Description
Cisco ISR4321/K9 Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC
Cisco ISR4331/K9 Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4351/K9 Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4431/K9 Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs

Compare to Similar Items

Table 3 shows the comparison between NIM-2FXS and NIM-2FXS/4FXO.
Product Number NIM-2FXS NIM-2FXS/4FXO
Product Description 2-Port Network Interface Module - FXS, FXS-E and DID 2-Port FXS/FXS-E/DID and 4-Port FXO Network Interface Module
Number of Ports 2 2
Cisco IOS Release XE3.13.4, XE3.14.3, XE3.15.1, XE3.16 and above XE3.14.3, XE3.15.1, XE3.16 and above
Weight 0.42 lb (191 g) 0.52 lb (236g)
PVDM4-64
Add to wishlist Compare

PVDM4-64

Login To See Price Read more

Quick Specs

Figure 1 shows the appearance of PVDM4-64. Table 1 shows the Quick Specs.
Product Code PVDM4-64
Slot On-board motherboard or T1/E1 module slot
Description 64-channel high-density voice DSP module
Low Complexity 64
Medium Complexity 48
High Complexity 32

Compare to Similar Items

Table 2 shows the comparison of PVDM4-64, PVDM4-32 and PVDM4-128.

Product Code PVDM4-64 PVDM4-32 PVDM4-128
Slot On-board motherboard or T1/E1 module slot On-board motherboard or T1/E1 module slot On-board motherboard or T1/E1 module slot
Description 64-channel high-density voice DSP module 32-channel high-density voice DSP module 128-channel high-density voice DSP module
Low Complexity 64 32 128
Medium Complexity 48 24 96
High Complexity 32 16 64

SPA-1XOC12-POS-V2=
Add to wishlist Compare

SPA-1XOC12-POS-V2=

Login To See Price Read more

Quick Specs

Figure 1 shows the appearance ofSPA-1XOC12-POS-V2=. Table 1 shows the Quick Specs.
Product Code SPA-1XOC12-POS-V2=
SPA 1-Port OC-12c/STM-4 POS SPA
SIP Supported:Cisco ASR1000-SIP10 Yes
SIP Supported:Cisco ASR1000-SIP40 Yes
Number of Ports 2 (ships SPA-2XOC12-POS)
Minimum IOS XE Release Cisco IOS XE 2.4
Minimum Hardware Revision 1.0

The Configuration

Table 2 shows the recommended elements for the SPA-1XOC12-POS-V2=.
Model Description
SFP-OC3-LR2 OC3/STM1 SFP, Single-mode fiber, Long Reach (80km)
SFP-OC3-LR1 OC3/STM1 SFP, Single-mode fiber, Long Reach (40km)
SFP-OC12-SR OC12/STM4 SFP, Short Reach
SFP-OC3-IR1 OC3/STM1 SFP, Single-mode fiber, Intermediate Reach
SFP-OC3-SR OC3/STM1 SFP, Single-mode fiber, Short Reach
SFP-OC12-IR1 OC-12/ STM-4 SFP, Intermediate Reach (15km)
C9300-NM-8X
Add to wishlist Compare

C9300-NM-8X

Login To See Price Read more

Quick Spec

Figure 1 shows the appearance of C9300-NM-8X.   Table 1 shows the quick spec.
Part Number C9300-NM-8X
Product Description Catalyst 9300 8 x 10GE Network Module
Supported Devices Cisco Catalyst 9300 Series Switch

Compare to Similar Items

Table 2 shows the comparison between C9300-NM-8X and C9300-NM-2Q.
Product Code C9300-NM-8X C9300-NM-2Q
Product Description Catalyst 9300 8 x 10GE Network Module Catalyst 9300 2 x 40GE Network Module
Supported Devices Cisco Catalyst 9300 Series Switch Cisco Catalyst 9300 Series Switch