No products in the cart.
Showing 1–16 of 72 results
Quick Specs
Figure 1 shows the appearance of SFP-GE-S. Table 1 shows the Quick Specs.|
Part Number: |
SFP-GE-S |
|
Form Factor: |
SFP |
|
TX Wavelength: |
850nm |
|
Reach: |
500m |
|
Cable Type: |
multimode fiber |
|
Rate Category: |
1000Base |
|
Interface Type: |
SX |
|
DDM: |
Yes |
|
Connector Type: |
Dual-LC |
Quick Specs
Figure 1 shows the appearance of SFP-GE-Z. Table 1 shows the Quick Specs.|
Part Number: |
SFP-GE-Z |
|
Form Factor: |
SFP |
|
TX Wavelength: |
1550nm |
|
Reach: |
80km |
|
Cable Type: |
singlemode fiber |
|
Rate Category: |
1000Base |
|
Interface Type: |
ZX |
|
DDM: |
Yes |
|
Connector Type: |
Dual-LC |
Quick Specs
Figure 1 shows the appearance of SFP-GE-T. Table 1 shows the Quick Specs.|
Part Number: |
SFP-GE-T |
|
Form Factor: |
SFP |
|
TX Wavelength: |
NA |
|
Reach: |
100m |
|
Cable Type: |
copper ethernet |
|
Rate Category: |
1000Base |
|
Interface Type: |
T |
|
DDM: |
No |
|
Connector Type: |
RJ45 |
Quick Specs
Figure 1 shows the appearance of SFP-GE-L. Table 1 shows the Quick Specs.|
Part Number: |
SFP-GE-L |
|
Form Factor: |
SFP |
|
TX Wavelength: |
1310nm |
|
Reach: |
10km |
|
Cable Type: |
singlemode fiber |
|
Rate Category: |
1000Base |
|
Interface Type: |
LX |
|
DDM: |
Yes |
|
Connector Type: |
Dual-LC |
Quick Spec
The figure shows the appearance of NIM-1GE-CU-SFP. Table 1 shows the quick spec.| Product Number | NIM-1GE-CU-SFP |
| Product Description | 1-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module |
| Supported Devices | Cisco 4000 Series Integrated Services Router |
| Form Factor | Network Interface Module (NIM) |
| Dimensions (H x W x D) | 1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm) |
| Weight | 240 grams |
Supported Devices
Table 2 shows the supported devices for the NIM-1GE-CU-SFP.| Product number | Model | Description |
| CISCO ISR4221/K9 | Cisco ISR 4221 (2GE,2NIM,4G FLASH,4G DRAM,IPB) | 35Mbps-75Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM |
| CISCO ISR4221-SEC/K9 | Cisco ISR 4221 SEC Bundle with SEC lic | 35Mbps-75Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, SEC Bundle with SEC lic |
| Cisco ISR4321/K9 | Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base) | 50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC |
| Cisco ISR4331/K9 | Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base) | 100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC |
| Cisco ISR4351/K9 | Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) | 200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC |
| Cisco ISR4431/K9 | Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base) | 500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs |
Compare to Similar Items
Table 3 shows the comparison between NIM-1GE-CU-SFP and NIM-2GE-CU-SFP.| Product Number | NIM-1GE-CU-SFP | NIM-2GE-CU-SFP |
| Product Description | 1-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module | 2-port Gigabit Ethernet, dual-mode GE/SFP, Network Interface Module |
| Supported Devices | Cisco 4000 Series Integrated Services Router | Cisco 4000 Series Integrated Services Router |
| Dimensions (H x W x D) | 1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm) | 1.25 x 3.50 x 7.24 in. (32 x 89 x 184 mm) |
| Weight | 240 grams | 252 grams |
Quick Specs
Table 1shows the Quick Specs.| Product Code | CPAK-100G-CWDM4= |
| Description | 100GBASE-CWDM4 Cisco CPAK Module for SMF |
| Dimensions | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) |
| Wavelength (nm) | 1271, 1291, 1311, 1331 |
| Cable Type | SMF Duplex |
| Core Size (Microns) | 9-micron coreSMF per G.652 |
| Modal Bandwidth (MHz*km) | \ |
| Cable Distance | 2 km |
Product Details
Table 2 Cisco CPAK 100GBASE module features and benefits| Requirement | Cisco CPAK Module Supporting Feature |
| Accommodate ever-growing bandwidth requirements | Up to 10 100-Gigabit Ethernet connections deliver as much as 1 Tbps of front-panel bandwidth |
|
Control costs |
Form factor consumes 40% less power than CFP2 and 70% less power than CFP form factors |
|
Real estate conservation |
Minimal footprint allows 20% greater port density and bandwidth than competing products |
|
High availability for business continuity |
Hot-swappable input/output device plugs into a Cisco CPAK-module-based switch, router, or optical platform port |
|
Accommodate a variety of distance and fiber type requirements |
Flexible interface choices |
|
Investment protection, affordable migration to higher bandwidth |
Support for a pay-as-you-grow model Can plug any Cisco 100-Gbps, 40-Gbps, and 10-Gbps line cards into Cisco CPAK modules (supports the Cisco AnyPort solution) |
|
Manage performance |
Digital Optical Monitoring (DOM) support |
|
Proper functioning and high performance with all Cisco platforms |
Cisco quality identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco |
|
Standards compliance for equipment flexibility and choice |
Interoperability with any IEEE-compliant: 100GBASE-SR4, 100GBASE-LR4, 100GBASE-SR10, 40GBASE-SR4, 10GBASE-SR, 10GBASE-LR |
Platform support
Cisco CPAK 100GBASE modules are supported on Cisco high-end switches, routers, and transport equipment: ASR 9000 Series Router CRS-X Carrier Routing System NCS 2000, 4000, and 6000 Series Routers Nexus 7000 and 7700 Series Switches Cisco ONS Transport PlatformCompare to Similar ItemsCompare to Similar Items
Table 3shows the comparison.| Parameters | CPAK-100G-CWDM4= | CPAK-100GE-LR4= | CPAK-100G-ER4L= | CPAK-100G-LR4= | CPAK-100G-PSM4= | CPAK-100G-SR4= | CPAK-100G-SR10= |
| Description | 100GBASE-CWDM4 Cisco CPAK Module for SMF | 100GBASE-LR4 Cisco CPAK Module for SMF (terminated with LC Connectors) | 100GBASE-ER4 Lite Cisco CPAK Module for SMF | 100GBASE-LR4 Cisco CPAK Module for SMF (terminated with LC Connectors) | 100GBASE PSM4 Cisco CPAK Module for SMF | 100GBASE-SR4 Cisco CPAK Module for MMF | 100GBASE-SR10 Cisco CPAK Module for MMF |
| Dimensions | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) | 11.6 x 34.8 x 101.2 mm (0.46 x 1.37 x 3.98 in) |
| Wavelength (nm) | 1271, 1291, 1311, 1331 | 1310 | 1310 | 1310 | 1295 to 1325 | 850 | 850 |
| Cable Type | SMF Duplex | SMF Duplex | SMF Duplex | SMF Duplex | SMF (12 fibers) | MMF (12 fibers) | MMF (12 fibers) |
| Core Size (Microns) | 9-micron coreSMF per G.652 | 9-micron coreSMF per G.652 | 9-micron coreSMF per G.652 | 9-micron coreSMF per G.652 | 9-micron coreSMF per G.652 | 50.0 50.0 | 50.0 50.0 |
| Modal Bandwidth (MHz*km) | \ | \ | \ | \ | \ | 2000 (OM3) 4700 (OM4) | 2000 (OM3) 4700 (OM4) |
| Cable Distance | 2 km | 10 km | 25 km | 10 km | 500 m | 70m 100m | 100m 150m |
| Supported Mode | 1x100G | 1x100G | 1x100G | 1x100G | 1x100G | 1x100G | 1x100G 2x40G 10x10G |
| Supported Protocol | IEEE 802.3ba | IEEE 802.3ba | IEEE 802.3ba ITU OTU4 | IEEE 802.3ba ITU OTU4 | IEEE 802.3ba | IEEE 802.3ba | 1x100G: IEEE 802.3ba ITU OTU4 2x40G: IEEE 802.3ba ITU OTU3 10x10G: IEEE 802.3ae FC ITU OTU2 ITU OTU1e ITU OTU2e |
Quick Spec
Table 1 shows the quick spec of the CISCO891-K9.| Product Code | CISCO891-K9 |
| Manufacturer | Cisco |
| Description | Cisco 891 GigaE SecRouter |
Product Features
- ● High-Speed Connectivity: The CISCO891-K9 offers Gigabit Ethernet connectivity for high-speed network connections.
- ● Enhanced Security: This security router has advanced features to protect your network from threats and attacks.
- ● Wide Range of Services: The router supports data, voice, video, and wireless services, enhancing business communication and productivity.
Quick Spec
Table 1 shows the quick spec.| Product Code | CISCO892-K9 |
| Description | Cisco 892 Gigabit Ethernet security router |
| Default and maximum DRAM | 768 MB |
| Default and maximum flash memory | 256 MB |
| WAN | 1-port GE 1-port FE |
| LAN switch | 8-port 10-/100-Mbps managed switch |
| Physical dimensions and weight | Product dimensions:
Nonwireless models:
|
Product Details
Figure 1 shows the front panel of CISCO892-K9. Figure 2 shows the back panel of CISCO892-K9.Compare to Similar Items
Table 2 shows the comparison between CISCO892-K9 and CISCO892W-AGN-E-K9.| Product Code | CISCO892-K9 | CISCO892W-AGN-E-K9 |
| Description | Cisco 892 Gigabit Ethernet security router | Cisco 892W Gigabit Ethernet security router with802.11n,ETSI compliant |
| Default and maximum DRAM | 768 MB | 768 MB |
| Default and maximum flash memory | 256 MB | 256 MB |
| Physical dimensions and weight | Product dimensions:
Nonwireless models:
|
Product dimensions:
Wireless models:
|
Quick Specs
Table 1 shows the Quick Specs.| Product Code | C891F-K9 |
| Rack Units | 1RU |
| WAN Ports | 1-port GE or 1port SFP 1-port FE |
| LAN Ports | 8-port 10-/100-/1000-Mbps managed switch (4ports PoE capable with 125W power supply adapter) |
| 802.11a/g/n Option | Yes Cisco CleanAir technology |
| Integrated USB 2.0/AUX/Console | Yes |
| DRAM | 512MB |
| Flash Memory | 256MB |
| Dimensions | 4.62 x 32.28 x 24.84 cm (includes rubber feet) 4.45 x 32.28 x 24.84 cm (without rubber feet) |
| Package Weight | 4.49 Kg |
Product Details
Figure 1 shows the front panel of C891F-K9. Figure 2 shows the back panel of C891F-K9. Note:| ① | Back up WAN port—FE WAN | ⑧ | Console/Auxiliary port |
| ② | ISDN | ⑨ | Power connector |
| ③ | Primary WAN port—GE WAN | ⑩ | On/Off switch |
| ④ | SFP | Reset button | |
| ⑤ | USB port | Earth ground connection | |
| ⑥ | V.92 backup | Kensington security slot | |
| ⑦ | 8 x port 10/100/1000 Ethernet Ports with 4 x PoE Ports |
The Configuration
Table 2 shows the recommended configuration of C891F-K9 router.| Items | Description |
| CAB-AC= | CAB-AC= AC Power Cord (North America), C13, NEMA 5-15P, 2.1m |
| S890VK9-15001M | Cisco 890 Series IOS UNIVERSAL |
| MEM8XX-256U512D | DRAM Upgrade |
| ISR-CCP-EXP ? | Cisco Config Pro Express on Router Flash |
| CAB-ETH-S-RJ45 | Cisco Router Cable CAB-ETH-S-RJ45 |
| PWR-60W-AC | Power Supply 60 Watt AC |
| SL-890-AIS | Cisco 890 Advanced IP Services License |
| GLC-LH-SM | GE SFP, LC connector LX/LH transceiver |
| GLC-SX-MM | GE SFP, LC connector SX transceiver |
| GLC-ZX-SM | 1000BASE-ZX SFP |
Compare to Similar Items
Table 3 shows the comparison between C881-K9 and C891F-K9.| Models | C881-K9 | C891F-K9 |
| Interfaces | - LAN: 4 x 10Base-T/100Base-TX? - Management: 1 x console - WAN : 1 x 10Base-T/100Base-TX - USB : 1 x 4 PIN USB Type A | - LAN: 8 x Gigabit ports; 1 x Fast Ethernet ports - Uplink: 1 x SFP ports - Management: 1 x console - USB : 1 x 4 PIN USB Type A |
| POE | 2 port integrated PoE | 4 POE ports |
| FAN | Fanless chassis | Fanless chassis |
Quick Spec
Table 1 shows the quick spec.| Model | ISR4461-V/K9 |
| Aggregate Throughput | 1.5Gbps |
| Total onboard WAN or LAN 10/100/1000 ports | 4 |
| RJ-45-based ports | 4 |
| SFP-based ports | 4 |
| Enhanced service-module slots | 3 |
| Doublewide service-module slots | 2 |
| NIM slots | 3 |
| OIR (all I/O modules) | Yes |
| Onboard ISC slot | 1 |
| Dimensions (H x W x D) | 3.5 x 17.25 x 18.5 in (88.9 x 438.15 x 469.9 mm) |
| Rack height | 2 Rack Units (2RU) |
The Modules, Cards, Licenses
Table 2 shows the recommended products.| Model | Description |
| MEM-4460-8G | 8G DRAM (1 DIMM) for Cisco ISR 4460 |
| MEM-4460-16G | 16G DRAM (1 DIMM) for Cisco ISR 4461 |
| MEM-4460-32G | 32G DRAM (1 DIMM) for Cisco ISR 4460 |
| MEM-FLSH-8GU16G | 8G to 16G Flash Memory Upgrade for Cisco ISR 4400 |
| MEM-FLSH-8GU32G | 8G to 32G Flash Memory Upgrade for Cisco ISR 4460 |
| NIM-1MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-2MFT-T1/E1 | 2 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module |
| NIM-4MFT-T1/E1 | Voice/WAN Module (4-port T1/E1) |
| NIM-8MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-1CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module |
| NIM-2CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module |
| FL-44-HSEC-K9= | U.S. Export Restriction Compliance license for 4400 series |
Compare to Similar Items
Table 3 shows the comparison.|
Model |
ISR4461/K9 |
ISR4461-V/K9 |
|
Bundle |
None |
Voice Bundle |
|
Aggregate Throughput |
1.5Gbps |
1.5Gbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
4 |
4 |
|
RJ-45-based ports |
4 |
4 |
|
SFP-based ports |
4 |
4 |
|
Enhanced service-module slots |
3 |
3 |
|
Doublewide service-module slots |
2 |
2 |
|
NIM slots |
3 |
3 |
|
OIR (all I/O modules) |
Yes |
Yes |
|
Onboard ISC slot |
1 |
1 |
Quick Spec
Table 1 shows the quick spec.| Model | ISR4461-SEC/K9 |
| Aggregate Throughput | 1.5Gbps |
| Total onboard WAN or LAN 10/100/1000 ports | 4 |
| RJ-45-based ports | 4 |
| SFP-based ports | 4 |
| Enhanced service-module slots | 3 |
| Doublewide service-module slots | 2 |
| NIM slots | 3 |
| OIR (all I/O modules) | Yes |
| Onboard ISC slot | 1 |
| Dimensions (H x W x D) | 3.5 x 17.25 x 18.5 in (88.9 x 438.15 x 469.9 mm) |
| Rack height | 2 Rack Units (2RU) |
The Modules, Cards, Licenses
Table 2 shows the recommended products.| Model | Description |
| MEM-4460-8G | 8G DRAM (1 DIMM) for Cisco ISR 4460 |
| MEM-4460-16G | 16G DRAM (1 DIMM) for Cisco ISR 4461 |
| MEM-4460-32G | 32G DRAM (1 DIMM) for Cisco ISR 4460 |
| MEM-FLSH-8GU16G | 8G to 16G Flash Memory Upgrade for Cisco ISR 4400 |
| MEM-FLSH-8GU32G | 8G to 32G Flash Memory Upgrade for Cisco ISR 4460 |
| NIM-1MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-2MFT-T1/E1 | 2 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module |
| NIM-4MFT-T1/E1 | Voice/WAN Module (4-port T1/E1) |
| NIM-8MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-1CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module |
| NIM-2CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module |
| FL-44-HSEC-K9= | U.S. Export Restriction Compliance license for 4400 series |
Compare to Similar Items
Table 3 shows the comparison.|
Model |
ISR4461/K9 |
ISR4461-SEC/K9 |
|
Bundle |
None |
Security Bundle |
|
Aggregate Throughput |
1.5Gbps |
1.5Gbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
4 |
4 |
|
RJ-45-based ports |
4 |
4 |
|
SFP-based ports |
4 |
4 |
|
Enhanced service-module slots |
3 |
3 |
|
Doublewide service-module slots |
2 |
2 |
|
NIM slots |
3 |
3 |
|
OIR (all I/O modules) |
Yes |
Yes |
|
Onboard ISC slot |
1 |
1 |
Quick Spec
Table 1 shows the quick spec.| Model | ISR4461-AXV/K9 |
| Aggregate Throughput | 1.5Gbps |
| Total onboard WAN or LAN 10/100/1000 ports | 4 |
| RJ-45-based ports | 4 |
| SFP-based ports | 4 |
| Enhanced service-module slots | 3 |
| Doublewide service-module slots | 2 |
| NIM slots | 3 |
| OIR (all I/O modules) | Yes |
| Onboard ISC slot | 1 |
| Dimensions (H x W x D) | 3.5 x 17.25 x 18.5 in (88.9 x 438.15 x 469.9 mm) |
| Rack height | 2 Rack Units (2RU) |
The Modules, Cards, Licenses
Table 2 shows the recommended products.| Model | Description |
| MEM-4460-8G | 8G DRAM (1 DIMM) for Cisco ISR 4460 |
| MEM-4460-16G | 16G DRAM (1 DIMM) for Cisco ISR 4461 |
| MEM-4460-32G | 32G DRAM (1 DIMM) for Cisco ISR 4460 |
| MEM-FLSH-8GU16G | 8G to 16G Flash Memory Upgrade for Cisco ISR 4400 |
| MEM-FLSH-8GU32G | 8G to 32G Flash Memory Upgrade for Cisco ISR 4460 |
| NIM-1MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-2MFT-T1/E1 | 2 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module |
| NIM-4MFT-T1/E1 | Voice/WAN Module (4-port T1/E1) |
| NIM-8MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-1CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module |
| NIM-2CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module |
| FL-44-HSEC-K9= | U.S. Export Restriction Compliance license for 4400 series |
Compare to Similar Items
Table 3 shows the comparison.|
Model |
ISR4461/K9 |
ISR4461-AXV/K9 |
|
Bundle |
None |
AXV Bundle |
|
Aggregate Throughput |
1.5Gbps |
1.5Gbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
4 |
4 |
|
RJ-45-based ports |
4 |
4 |
|
SFP-based ports |
4 |
4 |
|
Enhanced service-module slots |
3 |
3 |
|
Doublewide service-module slots |
2 |
2 |
|
NIM slots |
3 |
3 |
|
OIR (all I/O modules) |
Yes |
Yes |
|
Onboard ISC slot |
1 |
1 |
Quick Spec
Table 1 shows the quick spec.| Model | ISR4461-AX/K9 |
| Aggregate Throughput | 1.5Gbps |
| Total onboard WAN or LAN 10/100/1000 ports | 4 |
| RJ-45-based ports | 4 |
| SFP-based ports | 4 |
| Enhanced service-module slots | 3 |
| Doublewide service-module slots | 2 |
| NIM slots | 3 |
| OIR (all I/O modules) | Yes |
| Onboard ISC slot | 1 |
| Dimensions (H x W x D) | 3.5 x 17.25 x 18.5 in (88.9 x 438.15 x 469.9 mm) |
| Rack height | 2 Rack Units (2RU) |
The Modules, Cards, Licenses
Table 2 shows the recommended products.| Model | Description |
| MEM-4460-8G | 8G DRAM (1 DIMM) for Cisco ISR 4460 |
| MEM-4460-16G | 16G DRAM (1 DIMM) for Cisco ISR 4461 |
| MEM-4460-32G | 32G DRAM (1 DIMM) for Cisco ISR 4460 |
| MEM-FLSH-8GU16G | 8G to 16G Flash Memory Upgrade for Cisco ISR 4400 |
| MEM-FLSH-8GU32G | 8G to 32G Flash Memory Upgrade for Cisco ISR 4460 |
| NIM-1MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-2MFT-T1/E1 | 2 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module |
| NIM-4MFT-T1/E1 | Voice/WAN Module (4-port T1/E1) |
| NIM-8MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-1CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module |
| NIM-2CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module |
| FL-44-HSEC-K9= | U.S. Export Restriction Compliance license for 4400 series |
Compare to Similar Items
Table 3 shows the comparison.|
Model |
ISR4461/K9 |
ISR4461-AX/K9 |
|
Bundle |
None |
AppX License |
|
Aggregate Throughput |
1.5Gbps |
1.5Gbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
4 |
4 |
|
RJ-45-based ports |
4 |
4 |
|
SFP-based ports |
4 |
4 |
|
Enhanced service-module slots |
3 |
3 |
|
Doublewide service-module slots |
2 |
2 |
|
NIM slots |
3 |
3 |
|
OIR (all I/O modules) |
Yes |
Yes |
|
Onboard ISC slot |
1 |
1 |
Quick Spec
Table 1 shows the quick spec.|
Technical Specifications |
ISR4461/K9 |
|
Aggregate Throughput |
1.5Gbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
4 |
|
Total onboard WAN or LAN 10Gbps ports |
2 |
|
RJ-45-based ports |
4 |
|
SFP-based ports |
4 |
|
Enhanced service-module slots |
3 |
|
Doublewide service-module slots |
2 |
|
NIM slots |
3 |
|
OIR (all I/O modules) |
Yes |
|
Onboard ISC slot |
1 |
|
Dimensions (H x W x D) |
3.5 x 17.25 x 18.5 in (88.9 x 438.15 x 469.9 mm) |
|
Rack height |
2 Rack Units (2RU) |
The Modules, Cards, Licenses
Table 2 shows the recommended products.| Model | Description |
| MEM-4460-8G | 8G DRAM (1 DIMM) for Cisco ISR 4460 |
| MEM-4460-16G | 16G DRAM (1 DIMM) for Cisco ISR 4461 |
| MEM-4460-32G | 32G DRAM (1 DIMM) for Cisco ISR 4460 |
| MEM-FLSH-8GU16G | 8G to 16G Flash Memory Upgrade for Cisco ISR 4400 |
| MEM-FLSH-8GU32G | 8G to 32G Flash Memory Upgrade for Cisco ISR 4460 |
| NIM-1MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-2MFT-T1/E1 | 2 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module |
| NIM-4MFT-T1/E1 | Voice/WAN Module (4-port T1/E1) |
| NIM-8MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
| NIM-1CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module |
| NIM-2CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module |
| FL-44-HSEC-K9= | U.S. Export Restriction Compliance license for 4400 series |
Compare to Similar Items
Table 3 shows the comparison.|
Technical Specifications |
ISR4461/K9 |
ISR4451-X/K9 |
ISR4431/K9 |
ISR4351/K9 |
ISR4331/K9 |
ISR4321/K9 |
|
|
Aggregate Throughput |
1.5Gbps |
1 Gbps to 2 Gbps |
500 Mbps to 1 Gbps |
200 Mbps to 400 Mbps |
100 Mbps to 300 Mbps |
50 Mbps to 100 Mbps |
35 Mbps to 75 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
4 |
4 |
4 |
3 |
3 |
2 |
2 |
|
Total onboard WAN or LAN 10Gbps ports |
2 |
No |
No |
No |
No |
No |
No |
|
RJ-45-based ports |
4 |
4 |
4 |
3 |
2 |
2 |
2 |
|
SFP-based ports |
4 |
4 |
4 |
3 |
2 |
1 |
1 |
|
Enhanced service-module slots |
3 |
2 |
0 |
2 |
1 |
0 |
0 |
|
Doublewide service-module slots |
2 |
1 (assumes no singlewide SM-X modules installed) |
0 |
1 (assumes no singlewide SM-X modules installed) |
0 |
0 |
0 |
|
NIM slots |
3 |
3 |
3 |
3 |
2 |
2 |
2 |
|
OIR (all I/O modules) |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
No |
|
Onboard ISC slot |
1 |
1 |
1 |
1 |
1 |
1 |
No |
Quick Specs
Figure 1 shows the appearance of Cisco ISR4351/K9 for reference. ISR4351-AXV/K9 is similar with it. Table 1 shows the Quick Specs.| Product Code | ISR4351-AXV/K9 |
| Aggregate Throughput | 200 Mbps to 400 Mbps |
| Total onboard WAN or LAN 10/100/1000 ports | 3 |
| RJ-45-based ports | 3 |
| SFP-based ports | 3 |
| Enhanced service-module (SM-X) slot | 2 |
| NIM (Network Interface Modules) slots | 3 |
| Onboard ISC slot | 1 |
| Memory | 4 GB (default) / 16 GB (maximum) |
| Flash Memory | 4 GB (default) / 16 GB (maximum) |
| Power-supply options | Internal: AC, DC (roadmap), and PoE |
| Rack height | 2 RU |
| Dimensions (H x W x D) | 43.9 x 438.15 x 507.2 mm |
Product Details
Figure 2 shows the front panel of Cisco ISR4351/K9 for reference. ISR4351-AXV/K9 is similar with it.. Note:| ① | Power supply unit | ③ | Router power On/Off switch |
| ② | Router fan tray | ④ | LEDs |
| ① | USB Type A port | ⑦ | SFP port (GE 0/0/0) |
| ② | GE management port | ⑧ | RJ-45 port (GE/0/0/2) |
| ③ | USB Type B mini port | ⑨ | NIM slots |
| ④ | Auxiliary port | ⑩ | Ground connection |
| ⑤ | Console port | ⑪ | Enhanced Service Module (SM-X) slot |
| ⑥ | RJ-45 port (GE 0/0/1) | ||
The Modules, Cards, Licenses & Accessories
Table 2 shows some recommended modules, cards, licenses and several cables.|
Items |
Models |
Descriptions |
|
Console and Auxillary Cables |
CAB-AUX-RJ45 |
Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M |
|
CAB-ETH-S-RJ45 |
Cisco Router Cable CAB-ETH-S-RJ45 |
|
|
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Licenses |
L-SL-4350-APP-K9= |
Cisco AppX license L-SL-4350-APP-K9= with 1300 conns/ISRWAAS or vWAAS for ISR4351 |
|
Network Interface Modules |
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
NIM-8MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
SFPs for On-Board GE Ports |
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
|
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Compare to Similar Items
Table 3 shows the comparsion chart.|
Models |
ISR4351-AXV/K9 |
ISR4351/K9 |
|
Description |
Cisco ISR 4351 AXV Bundle.PVDM4-64 w/APP.SEC.UC lic.CUBE-25 |
Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base) |
|
Aggregate Throughput |
200 Mbps to 400 Mbps |
200 Mbps to 400 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
3 |
3 |
|
RJ-45-based ports |
3 |
3 |
|
SFP-based ports |
3 |
3 |
|
Enhanced service-module slots |
2 |
2 |
|
NIM slots |
3 |
3 |
|
Onboard ISC slot |
1 |
1 |
|
Rack height |
2 |
2 |
Quick Spec
Figure 1 shows the appearance of C1-CISCO4351/K9. Table 1 shows the quick spec.| Product Number | C1-CISCO4351/K9 |
| Product Description | Cisco ONE ISR 4351 (3GE.3NIM.2SM.4G FLASH.4G DRAM.IPB) |
|
Aggregate Throughput |
200 Mbps to 400 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
3 |
|
RJ-45-based ports |
3 |
|
SFP-based ports |
3 |
|
NIM slots |
3 |
|
OIR (all I/O modules) |
Yes |
|
Onboard ISC slot |
1 |
|
Default flash memory |
4 GB |
|
Maximum flash memory |
16 GB |
Product Details
Figure 2 shows the LEDs on the front panel of the Cisco ISR4351/K9 for reference. C1-CISCO4351/K9 is similar with it.Note:
|
① |
Power supply unit |
③ |
Router power On/Off switch |
|
② |
Router fan tray |
④ |
LEDs |
·The router fan tray is hidden behind the removable bezel.
·LEDs include ten indicators.
Table 2 shows the LED descriptions.
|
LEDs |
Represents |
Color |
Description |
|
PSU0 |
Power Supply Unit (P0 and P1) Status |
Green |
PSU is on and is providing power. |
|
Amber |
PSU is on but with errors or in a failure condition. |
||
|
Off |
Power supply is turned off. |
||
|
POE0 |
POE PSU |
Green |
PoE is on and providing power. |
|
Amber |
PoE is in a failed condition. |
||
|
Off |
PoE supply is not present. |
||
|
GE POE |
Internal PoE Daughter Card Status |
Green |
PSU is installed and providing power |
|
Amber |
PSU is installed but in a failure condition. |
||
|
Off |
PSU is off. |
||
|
FLASH |
System Flash Status |
Blinking Green |
Compact flash/eUSB flash is present and currently being accessed. |
|
TEMP |
Temperature Status |
Solid green |
All temperature sensors in the system are within acceptable range. |
|
Amber |
One or more temperature sensors in the system are outside the acceptable range. |
||
|
Off |
Temperature is not being monitored. |
||
|
PWR |
System Power |
Green |
System power is on and functioning correctly. |
|
Green blinking |
System power is in the process of shutting down. |
||
|
Amber |
System power is up, but low level initialization failed. |
||
|
Amber blinking |
System power is up, but the system failed to come out of reset. |
||
|
Off |
System power is off. |
||
|
SSD |
mSATA Slot Status |
Green |
SSD mSATA is present and enabled. |
|
Amber |
Initialized with error. |
||
|
Off |
Not present. |
||
|
ISC |
ISC Slot Status |
Green |
PVDM4 is present and enabled. |
|
Amber |
Initialized with error. |
||
|
Off |
Not present. |
||
|
FAN |
Fan Status |
Green |
All fans are operating. |
|
Amber |
One fan has stopped working. |
||
|
Blinking Amber |
Two or more fans have stopped working, or the fan tray has been removed. |
||
|
Off |
Fans are not being monitored. |
||
|
STAT |
System Status |
Solid green |
System operating normally. |
|
Blinking amber |
BIOS/Rommon is booting. |
||
|
Amber |
BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. |
||
|
Off |
System is not out of reset or BIOS image is not loadable. |
Figure 3 shows the back panel of Cisco C1-CISCO4351/K9.
Note:
|
① |
USB Type A port |
⑦ |
SFP port (GE 0/0/0) |
|
② |
GE management port |
⑧ |
RJ-45 port (GE/0/0/2) |
|
③ |
USB Type B mini port |
⑨ |
NIM slots |
|
④ |
Auxiliary port |
⑩ |
Ground connection |
|
⑤ |
Console port |
⑪ |
Enhanced Service Module (SM-X) slot |
|
⑥ |
RJ-45 port (GE 0/0/1) |
||
·The NIMs support 2 single-wide or 1 double-wide.
The Modules, Cards, Licenses & Accessories
Table 3 shows some recommended modules, cards, licenses and several cables.|
Items |
Models |
Descriptions |
|
Smart Serial Cables |
CAB-SS-449FC |
Cisco CAB-SS-449FC RS-449 Cable, DCE Female to Smart Serial, 10 Feet |
|
CAB-SS-V35FC |
Cisco CAB-SS-V35FC V.35 Cable, DCE Female to Smart Serial, 10 Feet |
|
|
Console and Auxillary Cables |
CAB-AUX-RJ45 |
Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M |
|
CAB-ETH-S-RJ45 |
Cisco Router Cable CAB-ETH-S-RJ45 |
|
|
CAB-CONSOLE-RJ45 |
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
|
CAB-CONSOLE-USB |
Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
|
Licenses |
L-SL-4350-APP-K9= |
Cisco AppX license L-SL-4350-APP-K9= with 1300 conns/ISRWAAS or vWAAS for ISR4351 |
|
Network Interface Modules |
NIM-1MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
NIM-2CE1T1-PRI |
Cisco Multiflex Trunk Voice and WAN network interface module |
|
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
|
NIM-2FXS |
Cisco Analog voice network interface card NIM-2FXS |
|
|
NIM-2FXS/4FXO |
Cisco Analog voice network interface card NIM-2FXS/4FXO |
|
|
NIM-8MFT-T1/E1 |
Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
|
SFPs for On-Board GE Ports |
GLC-SX-MMD |
Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
|
GLC-LH-SMD |
Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
|
GLC-ZX-SMD |
Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Compare to Similar Items
Table 4 shows the comparison between C1-CISCO4351/K9 and C1-CISCO4331/K9.| Product Number | C1-CISCO4351/K9 | C1-CISCO4331/K9 |
| Product Description | Cisco ONE ISR 4351 (3GE.3NIM.2SM.4G FLASH.4G DRAM.IPB) | Cisco ONE ISR 4331 (3GE.2NIM.1SM.4G FLASH.4G DRAM.IPB) |
|
Aggregate Throughput |
200 Mbps to 400 Mbps |
100 Mbps to 300 Mbps |
|
Total onboard WAN or LAN 10/100/1000 ports |
3 |
3 |
|
RJ-45-based ports |
3 |
2 |
|
SFP-based ports |
3 |
2 |
|
NIM slots |
3 |
2 |
|
Onboard ISC slot |
1 | 1 |