CWDM-SFP10G-1570=

Quick Specs

Table 1 shows the Quick Specs.

Model	NIM-1MFT-T1/E1
Serial data (channel-group*)	2 per port
E1 unframed G.703	Not supported
Voice channel associated signaling (CAS) (ds0-group)	24 per port (T1) 31 per port (E1) 1 per timeslot
PRI (pri-group*)	1 per port
Drop and insert (tdm-group)	24 per port (T1) 31 per port (E1) 1 per timeslot
Dimensions (H x W x D)	1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm)

* channel-group refers to bonding of one or more time slots into a single High-Level Data Link Control (HDLC)-framed serial connection for IP data traffic connectivity. This connection is used for HDLC, Frame Relay, and Multilink PPP (MLPPP) serial WAN connections. ds0-group refers to bonding of one or more time slots into a single TDM voice connection using CAS such as ear and mouth (E&M), foreign exchange station (FXS), or foreign exchange office (FXO). This connection is used for TDM PBX or PSTN connections and typically is deployed only on T1. * pri-group refers to bonding of two or more time slots into a single TDM connection using ISDN signaling. This connection is typically used for TDM PBX or PSTN voice connections on T1 and E1, and also for data WAN connections on E1. Each call on the PRI is individually indicated as being a voice or data call with the ISDN bearer capability delivered with the call. Signaling is done on the D-channel, which is always channel 24 on a T1 and channel 31 on an E1. tdm-group refers to cross-connecting one or more time slots from one TDM interface to another. This connection is used to groom channels from different access points onto a combined T1 or E1 uplink. Because the router merely cross-connects and does not interpret or route the traffic from the ingress interface to the egress interface, the traffic type (voice and data) is transparent to the router.

Quick Spec

The figure shows the appearance of NIM-ES2-8.   Table 1 shows the quick spec.

Product Number	NIM-ES2-8
Product Description	8-Port Layer 2?Gigabit Ethernet Switch Module NIM
Form Factor	Single-wide NIM form factor
Dimensions (H x W x D)	0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)
Weight	108g (0.24 lb)

Supported Devices

Table 2 shows the supported devices for the NIM-ES2-8.

Product number	Model	Description
CISCO ISR4221/K9	Cisco ISR 4221 (2GE,2NIM,4G FLASH,4G DRAM,IPB)	35Mbps-75Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM
CISCO ISR4221-SEC/K9	Cisco ISR 4221 SEC Bundle with SEC lic	35Mbps-75Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, SEC Bundle with SEC lic
Cisco ISR4321/K9	Cisco ISR 4321 (2GE,2NIM,4G FLASH,4G DRAM,IP Base)	50Mbps-100Mbps system throughtput, 2 WAN/LAN ports, 1 SFP port, multi-Core CPU,2 NIM, Security, Voice, WAAS, Intelligent WAN, OnePK, AVC
Cisco ISR4331/K9	Cisco ISR 4331 (2GE,2NIM,1SM,4G FLASH,4G DRAM,IP Base)	100Mbps-300Mbps system throughtput, 2 WAN/LAN ports, 2 SFP ports, multi-Core CPU,1 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4351/K9	Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IP Base)	200Mbps-400Mbps system throughtput, 2 WAN/LAN ports, 3 SFP ports, multi-Core CPU,2 service module slots, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC
Cisco ISR4431/K9	Cisco ISR 4431 (4GE,3NIM,8G FLASH,4G DRAM,IP Base)	500Mbps-1Gbps system throughtput, 4 WAN/LAN ports, 4 SFP ports, multi-Core CPU, Dual-power, Security, Voice, WAAS, Intelligrnt WAN, OnePK, AVC, separate control data and services CPUs

Compare to Similar Items

Table 3?shows the comparison between NIM-ES2-8?and NIM-ES2-8-P.

Product Number	NIM-ES2-8	NIM-ES2-8-P
Product Description	8-Port Layer 2?Gigabit Ethernet Switch Module NIM	8-port PoE/PoE+ Layer 2 Gigabit Ethernet LAN Switch NIM
Supported Devices	Cisco 4000 Series Integrated Services Router	Cisco 4000 Series Integrated Services Router
Dimensions (H x W x D)	0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)	0.8 x 6.2 x 4.8 in. (2.1 x 18.8 x 12.2 cm)
Weight	108g (0.24 lb)	149g (0.33 lb)

Quick Specs

Figure 1 shows the appearance of PVDM4-128. Table 1 shows the Quick Specs.

Product Code	PVDM4-128
Slot	On-board motherboard or T1/E1 module slot
Description	128-channel high-density voice DSP module
Low Complexity	128
Medium Complexity	96
High Complexity	64

Compare to Similar Items

Table 2 shows the comparison of PVDM4-64, PVDM4-32 and PVDM4-128.

Product Code	PVDM4-64	PVDM4-32	PVDM4-128
Slot	On-board motherboard or T1/E1 module slot	On-board motherboard or T1/E1 module slot	On-board motherboard or T1/E1 module slot
Description	64-channel high-density voice DSP module	32-channel high-density voice DSP module	128-channel high-density voice DSP module
Low Complexity	64	32	128
Medium Complexity	48	24	96
High Complexity	32	16	64

Quick Spec

Parameter	Data
Product Name	NIM-4BRI-NT/TE
Ports	4-port BRI
Interface Type	Network Interface Module (NIM)
Compatibility	Cisco ISR 4000 Series
Network Protocol Support	ISDN

Product Features

• Four BRI ports for flexible connectivity.
• Supports both NT and TE modes for ISDN line.
• Integrated with Cisco's ISR 4000 series for streamlined infrastructure.
• High performance for voice and data integration.
• Easy to install and manage.

Product Applications

1. Small and medium-sized businesses looking for cost-effective voice solutions. 2. Enterprises aiming to integrate voice and data traffic. 3. Organizations requiring high-density voice connectivity for their ISR routers.

Supported Options

Accessory	Model
High-speed WAN Interface Cards	HWIC-4B-S/T
PVDM Modules	PVDM4-32
Power Supply	PWR-4450-AC

Compare to Similar Items

Model	Differences
NIM-4BRI-NT/TE	N/A - Current Product
NIM-2BRI-NT/TE	2-port BRI vs. 4-port BRI
NIM-4MFT-T1/E1	Digital voice/data module vs. BRI voice module